[Dx4win] Format for FT8 mode Input in ADIF file for TQSL?

[Mike Cizek W0VTT]

Hello Paul,

Yes, there are only three characters in FT8, so you need to change all of
those MODE:4 to MODE:3.  You won't have to fuss with this when the new
version comes out :-)

73,
Mike W0VTT

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Paul Ferguson
Sent: Monday, 14 August, 2017 17:22
To: dx4win at mailman.qth.net
Subject: [Dx4win] Format for FT8 mode Input in ADIF file for TQSL?

I used DX4WIN LOTW > Export to LOTW. Most of the QSOs in this batch 
were FT8 mode. I then edited the LOTW ADIF formatted file to indicate  
FT8 mode on all FT8 QSOs.

I noticed the file entry for a JT65 QSO mode was "<MODE:4>JT65" so I 
tried "<MODE:4>FT8" on FT8 QSOs.

When I use the TQSL V2.3.1 with Configuration data V11.1, it says  
"Invalid MODE (FT8)" on the first line containing the new mode.

Is it the "MODE:4" that is incorrect?

73,
Paul 
K5ESW 
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html