[Dx4win] Radio control with no serial port question

[Jesse Wall]

Todd,

You need to load the device drivers so it shows up as a com port. Then, you can double click it, go to the Port Settings tab, click advanced and set the com port you want to use.

Regards,
Jesse, KA8YYZ

--- tstrait at charter.net wrote:

From: "Todd" <tstrait at charter.net>
To: <DX4WIN at mailman.qth.net>
Subject: Re: [Dx4win] Radio control with no serial port question
Date: Tue, 29 Mar 2016 21:20:26 -0400

It shows up under system devices as an unknown device (didn’t know if I had some device driver for the radio on the old box I’m forgetting about?) as I can see it come and go if I plug/unplug the USB cable but doesn’t show up as a port option.  Is there a device driver I need installed for the radio (Yaesu FT920) that I’m totally forgetting about or something like that?  I feel stupid because I obviously had it working on the old computer but can’t get this one going. Both were/are running Vista but that’s a whole other story 

Howard – not radio settings, they are all fine (baud rate, etc.) it’s a com port connectivity issue.

Todd & Astrid
Astrid's Embroidery & Garment Printing
269-795-7297
www.astridsembroidery.com
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



_____________________________________________________________
Netscape.  Just the Net You Need.