[Dx4win] DX4WIN/CW Skimmer/SDR RX controlling "slave radio" TX frequency

[John, K9EL]

Radi,

Thank you for explaining what you have done.  Very interesting approach!

Thank you!

John
K9EL


-----Original Message-----
From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Radivoj
Kar, F6GNZ via DX4WIN
Sent: Sunday, March 20, 2016 12:19 PM
To: DX4WIN Reflector <dx4win at mailman.qth.net>
Subject: [Dx4win] DX4WIN/CW Skimmer/SDR RX controlling "slave radio" TX
frequency

Some time ago I was kicking my head how to listen permanently to DX-ped's
frequency, while being able to select any QSX TX frequency by click on the
Skimmer, even with QSX going beyond the +12kHz Skimmer's range. And just
found a solution which I wish to share with anybody interested:

I kept SDR RX controlled by DX4WIN and Skimmer via RCP1 and RCP2 of DDUtil,
but instead of controlling 1000MP from the "slave radio" port of DDUtil, I
have installed the DXLab's Commander and W3OA's Skimmer-to-Commander. I
programmed Commander to control the FT1000MP via CAT1 port of the microHAM
Router, and connected Skimmer-to Commander to Skimmer's Telnet Localport 701
(which was programmed in Skimmer's Telnet Tab, where also the "allow skimmer
commands" was checked).
Now, in Telnet-to-Commander window, I can select whether the click on
Skimmer's frequency sets vfoA or vfoB of the 1000MP, so I can now
permanently listen DX-ped frequency on Main RX vfoA and transmit on any QSX
frequency selected on Skimmer via vfoB of the 1000MP ! The Commander and StC
can be then left hidden on the Taskbar!
Hope this may be useful for others.
Best 73, Radi F6GNZ
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html