[Dx4win] Brother DK-1209 Label Problem

[Jesse Wall]

Hello Eric,

I don't own that printer, but possible there is a margin setting in the printer driver. Check the printer properties.

73,
Jesse, KA8YYZ

--- ericrosenberg.dc at gmail.com wrote:

From: Eric Rosenberg <ericrosenberg.dc at gmail.com>
To: DX4Win Reflector <dx4win at mailman.qth.net>
Subject: [Dx4win] Brother DK-1209 Label Problem
Date: Wed, 30 Dec 2015 23:21:38 -0500

I've started using a Brother one-label-at-a-time label maker, the 
QL-550, with DX4Win v8.05 It's a very nice printer, and much easier to 
deal with than a conventional printer and sheets of labels.

I first started out using DK-1201 labels, which are 1.1" x 3.5" (28.9mm 
x 90.3mm) which were fine other than that each label had to be trimmed 
as they are wider than the space on my card.

I then tried the DK-1209 label, which is 1.1" x 2.4" (28.9mm x 62mm). 
For some reason I cannot explain or figure out how to cure, the 
printable space in height is less than with the 1201 label, which is the 
same size.

I've tried adjusting all of the tweakable parameters in DX4Win, but 
can't expand that space.

Can anyone help?

Thanks, 73 & Happy New Year!

Eric W3DQ
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




_____________________________________________________________
Netscape.  Just the Net You Need.