[Dx4win] CC User shared by logger and CW Skimmer

[Jim Reisert AD1C]

Congratulations!  I knew you could get it working.

---------- Forwarded message ----------
From: f6gnz <no_reply at yahoogroups.com>
Date: Wed, Feb 24, 2016 at 3:25 PM
Subject: [ARUser] Re: CC User shared by logger and CW Skimmer
To: ARUser at yahoogroups.com

Hi Lee and all,

I installed CC User and updated to the v.3.0241 after some small
problems (during v3 update download and "Continue" the message to
close app was hidden, resulting in error message "Permission denied".
Closing CC User and resuming, upgrade went OK).

After configuring User, Bands and two Telnet Connections, one to
ve7cc-1 and another to my local CW skimmer port 7301 (edited CC User
cluster list and added my Skimmer localhost port 7301), in the CC User
window I started receiving spots both from ve7cc-1 and from my local
CW Skimmer.

To link spots to my logging program DX4WIN, in CC User clicked on
Config-Ports/Logging Program and in Ports setup under Logging Program
Connection checked "enable Telnet" and use port 7300. In DX4WIN I
selected as Cluster " Local>CC User:7300", and:

ALL WORKS UFB AS DESIRED!

I am getting remote and skimmer spots in my logger's BandMap, by
clicking on them I setup my radio band/frequency/mode, populate
logging window with selected callsign, and Skimmer starts skimming the
new band frequencies!
 " I'm haaaaapy again..."

Lee, thanks a lot for your fine application! I will use the last item
in the CC User Menu..

Best 73,
 Radi F6GNZ