[Dx4win] OT - LOTW w/Multiple Callsigns ??

[Mike Cizek W0VTT]

Hello Mike - 

No, that doesn't sound right.  It should also show WN8NBO and WA8NBO as
choices.  Did you establish station locations for both of those
certificates?  When I upload a file, after selecting the file, the Select
Station Location for Signing window shows all five of my callsigns.  You
should see all three of yours here.  There is a button on the far left of
this window that says New...  This will allow you to establish a new station
location for any of your existing callsigns, but does not allow you to add a
callsign.  

Check Callsign Certificates tab and make sure all three callsigns appear
here.  
Next, check the Station Locations tab and make sure each callsign has a
location.  You can add Station Locations on this tab.  GL.

73,
Mike W0VTT

-----Original Message-----
From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Mike
Rhodes
Sent: Wednesday, 14 December, 2016 14:17
To: dx4win at mailman.qth.net
Subject: Re: [Dx4win] OT - LOTW w/Multiple Callsigns ??

Mike,
   When I do the "Sign a log" thing, it says it will sign and upload as 
W8DN with location Ohio (all 3 calls use Ohio as location). Is it going 
to give me a chance to change after that or immediately send the file. 
Seems like I would remember since I just uploaded DN Qs last night but I 
guess that is one of the "benefits" of getting to be an old fart.

Thanks,
Mike / W8DN
DX4Win Since Version 0.97




On 12/14/2016 3:08 PM, Mike Cizek W0VTT wrote:
> Hello Mike -
>
> The certificate selection is in TQSL:
> Log Operations
> Sign a Log and upload it automatically to LoTW
> Select File - Open
> Select Station Location for Signing
>
> Check the Callsign Certificates tab in TQSL to make sure your certificates
> are properly installed.  They should each have the yellow emblem next to
> them.
>
> 73,
> Mike Cizek W0VTT
>
> -----Original Message-----
> From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Mike
> Rhodes
> Sent: Wednesday, 14 December, 2016 14:02
> To: dx4win at mailman.qth.net
> Subject: [Dx4win] OT - LOTW w/Multiple Callsigns ??
>
> ...finally getting around to uploading my logs from my two previous
> callsigns (WN/WA8NBO) to LOTW. Have installed the certificates,
> separated the Q's from my log and created ADIF files. However, I have
> yet to figure out how to upload using the correct certificate. If the
> process is defined in the instructions, I have overlooked it. Any help
> greatly appreciated.
>
> Thanks,
> Mike / W8DN
> DX4Win Since Version 0.97
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html