[Dx4win] Error in DXCC report - version 8.05

[Mike Rhodes]

Not exactly sure what you are trying to accomplish but, if all you want 
to see are CW QSOs then you need to change the "All Modes" setting to 
"CW". Otherwise, you should be good to go.

Mike / W8DN


On 12/13/2016 2:51 PM, OZ0J Joe wrote:
> Hi
>
>
> I earlier got the information that CW QSOs before 1 January 1975 do not
> count for DXCC. Since that I have tried to help my friend OZ1LO to find out,
> whatever there is an error in the DXCC report in DX4WIN version 8.05.
>
> I have created a log with 2 QSOs on 80 M. Both QSOs are with CW mode and one
> QSO is BEFORE 1 January 1975 and one AFTER.
>
> When I run the DXCC report (Report -> DXCC) I get this result:
>
> MIXED 2
> CW 1
> 80 M 2
>
> Even when I run the DXCC report with these settings:
>
> DXCC summary or listing
> Mode = CW
> Band = 80M
>
> I still get:
>
> MIXED 2
> CW 1
> 80 M 2
>
> Why do I not only get the CW DXCC awarded QSOs here?
>
> Pictures of the report settings and result can be found at
> https://dl.dropboxusercontent.com/u/2651703/dx4win-oz1lo.pdf
>
> How do I (or OZ1LO) get a report that ONLY show the valid CW DXCCs on each
> bands? Or is that not possible?
>
>
> 73 Joe, OZ0J
>
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>