[Dx4win] Future of DX4WIN - Rig Files
RWMaylott at aol.com
RWMaylott at aol.com
Wed Oct 21 18:06:46 EDT 2015
I have had an annoying rig file problem since I upgraded by Icom 756 Pro
III to an IC-7600.
Double clicking on a spot moves the correct frequency and mode to the
logging screen, but the radio itself usually does not change, and then the
logging screen frequency reverts to the old radio frequency after a couple of
seconds. However, if there is a QSX frequency posted, the radio goes to
that frequency immediately and the mode always changes. If you click enough
times, usually the radio will finally change to the spotted frequency.
I don't have a similar problem with either N1MM or Writelog,, and didn't
have it with the Pro III. Probably an easy fix but I don't have a clue as
to how to do it.
73, Dick, W2YE
In a message dated 10/20/2015 10:06:32 P.M. Eastern Daylight Time,
danki6x at socal.rr.com writes:
Check out FILE - DATABASES - RADIOS
I have also never edited any rig files but if you have the radio and can
choose a similar radio you might be able to make the edits. Also you can
figure out the ".rig" file itself and edit in Notepad.
/Dan KI6X
-----Original Message-----
From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Kostas
SV1DPI
Sent: Monday, October 19, 2015 9:19 PM
To: dx4win at mailman.qth.net
Subject: Re: [Dx4win] Future of DX4WIN
Even I am experienced user of dx4win, I don't know how to make a radio
file. Is there any tutorial under help or anywhere else to read? I would like
to learn to make (or to convert) these files...
73 Kostas SV1DPI
On 19/10/2015 8:51 μμ, ON4AOI wrote:
> ¨¨As for the rig development "tools" which are part of DX4WIN, they
> are probably somewhere above EXPERT user knowledge.¨¨
>
> Lou,
> I don´t agree with that its easy done with your own rig and your
computer.
> I made several rigfiles (different brands) over the years and they all
> work perfect here.
>
> Some reported that a few are not working on their computer.
>
> My 2cents comments
>
> LOU this is one of the problems that no one can predict.
> Why you may ask,
> Real RS232 ports are rare these days, Ad-ON comport cards are still on
> the market but expensive now.
> So everyone gets USB to Serial converters for less than 10-15$.
> 90% of these is crap for perfect serial communications and the fact
> that USB devices can´t be controlled like real rs232 ports. Some rigs
> have only USB now what makes it even worse to check.
>
> One of my HF systems has 28 serials in it.
> 6 real comports
> 10 virtual comports (Eltima drivers)
> 8 RS232 via TCPIP ports
> 4 USB to serial with authentic FTDI drivers
>
> To get this working like it should it took many retries before I
> figured out in what order to Install.
> All looked ok after the first time also, but it didn´t work like it
> should.
>
> How many do remove not used drivers anymore ?
>
> Guy ON4AOI-OT7K
>
>
>
>
> -----Oorspronkelijk bericht-----
> Van: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] Namens Lou
> Dietrich
> Verzonden: maandag 19 oktober 2015 18:30
> Aan: dx4win at mailman.qth.net
> Onderwerp: Re: [Dx4win] Future of DX4WIN
>
> Paul,
>
> I don't think anyone expects you to have every rig that is out
> there!....however if you had a rapport with the user group, I am sure
> people would volunteer to assist. DXLabs, N1MM+ , Logger32 and others
> don't seem to have any problem working with their user group to
> develop new rig files and features.
>
> If DX4WIN would attempt stay current with the requests of the user
> group (rig files and features), you would have a steady revenue stream
> but to allow DX4WIN to stagnate does little but encourage users to move
on.
>
> As for the rig development "tools" which are part of DX4WIN, they are
> probably somewhere above EXPERT user knowledge.
>
> If it weren't for AD1C's support, DX4WIN would be as useful as DOS 3.1!
>
> IMHO
>
> 73
>
> Lou N2TU
>
>
>
> On 10/18/2015 9:55 PM, Paul van der Eijk wrote:
>> Hi John,
>>
>> The tools to develop a new rig file are all part of DX4WIN; I have no
>> additional tools to do that.
>>
>> Over the years, a number of users have created or helped develop new
>> rig files. The important difference is having access to the radio
itself.
>>
>> --Paul, KK4HD
>>
>>
>> On Sun, Oct 18, 2015 at 6:45 PM, John Pritt <radiotech at nycap.rr.com>
> wrote:
>>> I certainly agree with you Bob. I put rig control right up there
>>> with working with new OSs. I apologize if I was not completely up
>>> to speed with why there are complaints with DX4WIN. I wasn't aware
>>> that Paul is not updating for new rigs. I'm still using a Ten Tec
Omni 6!
>>>
>>> John (N1JP)
>>> ----- Original Message ----- From: "ROBERT DEGRIPPO"
>>> <kr4da at bellsouth.net>
>>> To: <dx4win at mailman.qth.net>
>>> Sent: Sunday, October 18, 2015 6:11 PM
>>> Subject: Re: [Dx4win] Future of DX4WIN
>>>
>>>
>>> I too love DX4WIN......but if you do not have a RIG file that talks
>>> to
>>>> your radio
>>>> what do you do. I assure you NO RIG file and the enjoyment of
>>>> working DX and logging in real time is a real turn off.
>>>> So go out and buy a NON supported new rig and see how much you then
>>>> enjoy your logging program.
>>>> One of the huge incentives to buy was RIG control.
>>>> Think about not being able to use your rig with DX4WIN then think
>>>> about how you would feel.
>>>>
>>>> I bought a RIG control program from N4PY that allows it to
>>>> communicate with dx4win and fldigi. The N4PY program is amazing.
>>>> Try the
> demo.
>>>> Beautiful radio interface.
>>>> And I paid for it.
>>>>
>>>> And again all I am saying is please give us a current statement of
>>>> intentions.
>>>> I bought the program back in 2.0 have had other rigs and RIG files
>>>> were added and supported. Really a comment from Paul is not too
>>>> much to ask. IMHO.
>>>>
>>>> And don't give me the "well just move on crap". Paul should be the
>>>> one to tell me this at least. No one else.
>>>>
>>>> Bob
>>>> Sent from my iPad
>>>>
>>>> On Oct 18, 2015, at 5:54 PM, John Pritt <radiotech at nycap.rr.com>
wrote:
>>>>> Just to add my two cents, I love this program. It does everything
>>>>> that I want it to do. For my part I hope that it never goes away
>>>>> because I don't need the excitement of learning new software to
>>>>> keep my interest in amateur radio. I've been down the road of
>>>>> asking how this work or how that works, how do I do this or how do
>>>>> I do that. For me that is just frustrating. I don't criticize
>>>>> those that want new digital modes or just want to play with
>>>>> something new but for my money as long as it loads with the new
>>>>> OSs
> from Microsoft I'm a happy customer. Just saying...
>>>>> John
>>>>> N1JP
>>>>>
>>>>>
>>>>> ----- Original Message ----- From: <wosborne44 at gmail.com>
>>>>> To: <DX4WIN at mailman.qth.net>
>>>>> Sent: Sunday, October 18, 2015 12:51 PM
>>>>> Subject: [Dx4win] Future of DX4WIN
>>>>>
>>>>>
>>>>> HI All,
>>>>>> Maybe, if Paul is not in position to update the program, we on
>>>>>> this list could buy access to the source code and arrange to move
>>>>>> it forward as a not for profit operation. The details could be
>>>>>> tricky to work out but it seems feasible if Paul is interested,
>>>>>> and if we can make it good enough to again attract new users who
>>>>>> would pay to join this project. I have something like N1MM but
>>>>>> with a
> paid programer(s) involved.
>>>>>> Thanks,
>>>>>>
>>>>>> William Osborne--K5ZQ
>>>>>>
>>>>>> 270-205-9565
>>>>>>
>>>>>> Wosborne44 at gmail.com
>>>>>>
>>>>>>
>>>>>>
>>>>>> ______________________________________________________________
>>>>>> DX4WIN mailing list
>>>>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>>> Post: mailto:DX4WIN at mailman.qth.net
>>>>>>
>>>>>> This list hosted by: http://www.qsl.net Please help support this
>>>>>> email list: http://www.qsl.net/donate.html
>>>>>>
>>>>> ______________________________________________________________
>>>>> DX4WIN mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:DX4WIN at mailman.qth.net
>>>>>
>>>>> This list hosted by: http://www.qsl.net Please help support this
>>>>> email list: http://www.qsl.net/donate.html
>>>>>
>>>> ______________________________________________________________
>>>> DX4WIN mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:DX4WIN at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net Please help support this
>>>> email list: http://www.qsl.net/donate.html
>>>>
>>> ______________________________________________________________
>>> DX4WIN mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:DX4WIN at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net Please help support this
>>> email list: http://www.qsl.net/donate.html
>>>
>>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html
>
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the DX4WIN
mailing list