[Dx4win] VUCC Report Blank

[Dan Violette]

Thanks much Arne, that did it.  I kept looking at VUCC in the report awards.
Now I think I know what happened.  When I upgraded with Win 10 and had
changes in ports, I loaded an old INI without that and forgot to edit that.
I knew something to do with no bands to choose in the award report was the
issue.

Can be frustrating when you know you are missing something obvious!

Dan KI6X

-----Original Message-----
From: Dan Violette [mailto:danki6x at socal.rr.com] 
Sent: Wednesday, November 25, 2015 6:33 PM
To: 'DX4WIN at mailman.qth.net'
Subject: RE: [Dx4win] VUCC Report Blank

Now I realize the VUCC field should be blank since I never submitted
anything.  Just not getting W/C results in my VUCC Report.  Dan KI6X

-----Original Message-----
From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Dan
Violette
Sent: Wednesday, November 25, 2015 5:12 PM
To: DX4WIN at mailman.qth.net
Subject: [Dx4win] VUCC Report Blank

I have done this every few months for a couple years now and cannot today
after an hour trying.  I am trying to get a VUCC report of my grids worked
and confirmed. I then save as CSV and edit in Excel to have paper report.

 

All VUCC reports are blank (some say "prefix" in the first column where I
would suspect "grid")

My VUCC field is blank for any QSO record (Searched VUCC Mixed field for C
or S)

 

I just can't figure out what is wrong and can't get C & W report for the
grids.

 

/Dan, KI6X

 

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html