[Dx4win] Cluster connects but no updates after

[Duane Calvin]

Thanks for a new clue, Kostas - around the same time the trouble started I switched from an AT&T Uverse modem/router to one from Time-Warner.  I will also check out VE7CC's client . . . 

	73, Duane

Duane Calvin, AC5AA
Austin, Texas
ac5aa at ac5aa.com 


-----Original Message-----
From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Kostas SV1DPI
Sent: Sunday, November 15, 2015 4:43 AM
To: dx4win at mailman.qth.net
Subject: Re: [Dx4win] Cluster connects but no updates after

I had also problems with clusters in the past. Clusters' connection braked after some time. I used VE7CC's client program which has a function to keep the connection alive. Dx4win was connected on this program and I could watch the spots. After a lot of time I  found that it was a problem in my adsl router/modem as when I changed this, I can connect to the clusters directly without a problem. I don' t know if this is your problem but just in case.

By the way it would be very good for all of us to use the ve7cc program. 
If I made a logging program right now from scratch, I wouldn't include a cluster interface but just a connection to ve7cc (beside this I wouldn't make a rig control routine also but just a connection to omnirig). My problem with ve7cc, is that many times I get bored to run another program and make the connection routine also. A nice solution would be if a future version of dx4win has an option to run ve7cc and connect to it automatically. Maybe there is an external program do this. Any info?

73 Kostas SV1DPI

On 14/11/2015 11:20 μμ, Duane Calvin wrote:
> Hi all - I have a peculiar problem that has cropped up.  I can't tell 
> if it's due to an MS update, or from my installing the latest Norton 
> Security software.  All has been working fine for some time, but as of 
> the last couple of weeks (roughly since I did the Norton install) I 
> can connect to a cluster, do a SH/DX to list the last series of spots, 
> but then nothing after that and I lose connection.  Now, I've got my 
> spots limited to 5-land, and there are not a lot of people actively 
> spotting in 5-land, but somehow the connection gets lost.  I don't see 
> any disconnect messages unless I try to send a spot, or do another 
> SH/DX in which case there is no response, and eventually I get a 
> message that the connection is closed.  I've looked through the Norton 
> settings but probably don't know what to look for.  If anyone can give me some hints, I'd sure appreciate it.
>
>   
>
>                 73, Duane
>
>   
>
> Duane Calvin, AC5AA
>
> Austin, Texas
>
> ac5aa at ac5aa.com
>
>   
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html