[Dx4win] ICOM IC-7700 f/w ver. 2.10 radio driver

[ON4AOI]

This is the spirit Jim,
You didn´t steel anything but managed a rigdriver for the IC-7700

But the IC-7700 (if I remember correct ) has some limitations
Compared to the IC-7100, IC-7600 and IC-7800 so still wondering why 
A modded 7100e4 rigdriver ( to correct address and baudrate) isn´t
Working for others.

I have a feeling that this has something to do with RS232(DB9) or CIV or USB
Connection and the related drivers.

I have been working on a VB project for the IC-7100 to set split 
Depending on Doppler effect for 432Mhz EME .
So far only via CIV (via home made RS232 level converter) its working
but not ok via the USB port and I have tried many drivers for the FTDI chip.

Guy ON4AOI      
 

-----Oorspronkelijk bericht-----
Van: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] Namens Jim Reisert AD1C
Verzonden: zondag 14 juni 2015 4:28
Aan: DX4WIN Reflector
Onderwerp: [Dx4win] ICOM IC-7700 f/w ver. 2.10 radio driver

I shamelessly stole Guy's (ON4AOI) ICOM IC-7100 radio driver and adapted it
to the IC-7700.  You can get it here:

    http://dx4win.ad1c.us/radios/

This driver is *only* for radios which have been updated to the version 2.10
firmware:

    http://www.icom.co.jp/world/support/download/firm/

Split frequency operation/logging is 1000% better than it used to be (yes, I
meant 1000).

This same radio driver might be usable with the IC-7600 and/or IC-7800 (and
-7850/-7851) radios, if they have been updated to the latest firmware (ver.
2.00 for IC-7600 and ver. 3.10 for IC-7800), by changing the ICOM hex
address code in DX4WIN Preferences | Radio.

If you have success (or failure) with these radios, let us know!

73 - Jim AD1C

--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html