[Dx4win] Unable to Show 80/160 Spots

[Dan Violette]

If you are showing DXCC (default) packet spots then look at REPORTS / AWARDS
and DXCC checked off settings.  Dan KI6X

-----Original Message-----
From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Byron
Peebles
Sent: Sunday, December 6, 2015 3:06 PM
To: dx4win at mailman.qth.net
Subject: [Dx4win] Unable to Show 80/160 Spots

I recently redeployed my 80/160 sloper and I can't seem to get the spots for
those bands.
I have confirmed the spots are showing in the packet window and that the
bands are checked in the packet setup preference, but no spots for either of
those bands appear.  Even "DX TEST 3525" shows nothing.

What am I missing?

73, Byron

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html