[Dx4win] Windows 10 and DX4WIN

[Kenneth Leon]

I upgraded my shack computer to Windows 10 recently without any issues. You said you are using IE10, but that may be a typo. I opted to use the new Windows 10 browser, Microsoft Edge as my default browser. It's working fine. All amateur radio software with CAT following is operating as before.
Open Control Panel and navigate to Network and Sharing Center.  Confirm that you are connected to your ISP provider via your home network ID and Wifi security key. Then confirm that it is listed as a Private Network. Windows 10 asked me to set up a "Homegroup ". Search for that menu, set it up, and write it down for future reference. Then confirm that you are or can connect to your original home network.
Hope this begins to cure your issue.
73,
Ken, NE6AA




-------- Original message --------
From: Don Prater <w4to at tds.net>
Date: 08/19/2015  10:31  (GMT-08:00)
To: Dx4win at mailman.qth.net
Subject: [Dx4win] Windows 10 and DX4WIN

Upgraded to IE10 and now I cannot connect to my own node via my local area
network.
I was able to connect to the node computer via its local
address(192.160.0.6). That no
longer works. Has anyone had the same problem and might have an answer?

Don   W4TO

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html