[Dx4win] Digital modes rtty psk

[bob]

I can  get mmtty running I just can not get the FT-991 to XMIT RTTY
using TX of MMTTY.

The only way I can get the FT-991 to XMIT RTTY is to use HRD and set the 
RADIO mode to DATA
and then I CAN XMIT RTTY.

The FT-991 options has got to be the problem. Until I figure it out or 
someone else does
the options to key the rig from mmtty......very frustrated...been trying 
everything
for hours now over the past few days.

FT-991 using the USB port has a built in SOUND card. That's why HRD works.

Thanks for the replies though I'll just plug alone and use your guys 
input maybe something will
fall into place.

Bob


On 4/1/2015 2:33 PM, Dave Perry wrote:
> Hi Bob,
>
> Yes, you can use MMTTY within DX4WIN without the rig file.  You will have to
> enter the Mode and Band by hand for each RTTY QSO.  But you can capture
> other information such as Callsign, name, qth and grid by double clicking
> within the MMTTY receive window.  You will also be able to use the function
> keys to transmit messages.
>
> Dave, N4QS
>
> -----Original Message-----
> From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Bob
> Sent: Wednesday, April 01, 2015 6:45 AM
> To: Dx4win at mailman.qth.net
> Subject: [Dx4win] Digital modes rtty psk
>
> I have never used the digital modes With in dx4win.
> If I want to use the mmtty module does the rig file NEED to work with mmtty?
> Or since there is NO rig file for a FT-991 does that mean I can not use
> mmtty with in Dx4win?
>
> Bob
>
> Sent from my iPad
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>


---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com