[Dx4win] Possible log corruption

[ALAN ZACK]

I don't know what you mean by QSO's in the "previously worked" window. If
you mean the OTHER QSO's window here is an explanation:

Go to FILE: PREFERENCES. Then open the QSO tab. Check what setting you have
for SEARCHING CALLSIGN. If it is anything other than EXACT then calls close
to the one in the logging window will also show.

For example, I have mine set to SUBSTREAM. So if I search for K4M when that
call was used for the Midway Isld DXpedition K4M will appear in my main
logging window but in my OTHER QSO's windows calls such as any VK4M
stations, K4MIJ, K4MM, IK4MHB, etc show up. In other words any call
containing K4M will be in my OTHER OSO's window. What you see depends on
what setting you are using for SEARCHING CALLSIGNS. I would use the left and
right pointers on the top of the main window to scroll back and forth among
all the calls the search for FW5JJ is showing you. Some might be close but
NOT the same call.

I have 7 QSO's with FW5JJ but no other calls close to him show in my OTHER
OSO's window.

GL & 73

Alan, K7ACZ

-----Original Message-----
From: DX4WIN [mailto:dx4win-bounces at mailman.qth.net] On Behalf Of Mark
Lunday
Sent: Sunday, September 28, 2014 6:17 AM
To: DX4WIN at mailman.qth.net
Subject: [Dx4win] Possible log corruption

All

Not sure why my search for a call FW5JJ shows 4 QSO's in the "previously
worked" window but only 2 QSO's in the logbook window.

Possible data file corruption?

In order to check, how can I download from LoTW, ALL QSO's which have been
uploaded (I upload weekly).  This will allow me to run a comparison.

I see the option to download all CONFIRMED QSO's from LoTW, but not ALL
LOGGED QSO's.

Thanks in advance.

Mark Lunday, WD4ELG
Greensboro, NC  FM06be
wd4elg at arrl.net
http://wd4elg.blogspot.com