[Dx4win] exporting log

[Bud Semon N7CW]

Dwayne,

That makes it very easy.   In the log entry window, under the LoTW menu,
select Export to LoTW.  This will open a window for you to name and save
the file.  Make sure you know where you put it.  You may chose to clear the
upload flags or not.  The file you saved is an ADIF file, that TQSL can
handle directly.

A couple hints - you must have the LoTW flag set in order for QSOs to show
up in the ADIF file.  You can use filters to select whichever QSOs you want
and then set the LoTW flag in the same menu selection.    Once you generate
the ADIF file - if you screw something up and want to create a new ADIF
file - you must clear the upload date and reset the upload flag (both in
the same menu) before it will let you re-make the ADIF file.

Good luck.

73, Bud  N7CW

On Thu, Sep 18, 2014 at 4:07 PM, Dwayne <863 at telus.net> wrote:

> Tnx for the reply Bud..
> I'am useing ver.. 8.04 in the main p/c and ver 8.05 in the lap top.  8.04
> is the one I would use to send my logs in to LOTW...
>  Tnx
>  Dwayne
>
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>