[Dx4win] Need help with MMTTY

[Joe Subich, W4TV]

 > Do you enabled the mic+lin : on????

No!  Do not use Mic+Line ... set MENU:MIC SEL to LINE while in DATA
mode (AFSK A, DATA A, etc.) and adjust the mic gain until you see
four to five bars of ALC while transmitting AFSK (see your K3 Owner's
Manual).

Also see example configurations for both MMTTY stand alone and DX4Win
(with the internal MMTTY) available in Router at Help | Download 
Documents or on-line at www.microHAM-USA.com/support.html. in the 
microKEYER II area.

Similar documents are available for all microHAM interfaces via
microHAM Router or www.microHAM-USA.com/support.html in the section
for the specific interface.

73,

    ... Joe, W4TV


On 2014-10-30 3:33 PM, Ricardo Navarrete wrote:
> Hi rich,
>
> Do you enabled the mic+lin : on????
>
> 2014-10-30 20:19 GMT+01:00 Rich Chatelain <rich_k7zv at gphilltop.com>:
>
>> I am looking for someone in the group that is successfully using MMTTY, K3
>> and MK II . I am not able to get any output on TX. I RX well so that is
>> handled. I have been trying in the AFSK A mode and NIL. I can see the MK II
>> go into the TX mode and so does  the K3 but I do seem to have any drive.
>> Any
>> experts out there?
>>
>>
>>
>> Rich K7ZV
>>
>> Rich_k7zv at gphilltop.com
>>
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>
>