[Dx4win] DX4WIN and PSK31/63

[Jim Reisert AD1C]

On Fri, Oct 17, 2014 at 6:27 AM, SM5DJZ Jan wrote:

> What is the best way to get PSK31/63 working in DX4WIN??
> I have tried an old MicroKEYER, and Router with the DigiPan20
> and can see activity, but won't get in TX-mode Hm...

Hi Jan,

I use DigiPan with a microKEYER, but outside of DX4WIN:

    http://www.digipan.net/

It only gets your PSK31 and PSK63, however.

Of course, it's more convenient to run PSK-31 from within DX4WIN.  I
believe DX4WIN uses the same PSK engine as DigiPan.

First, go to Preferences | Control and select the sound card for PSK
(both input and output).  Then bring up the PSK31 window using ALT-3
(or Window | PSK31).  If you right-click in the bottom of the PSK
window, just under the (macro) buttons, you can get to a Settings
menu, where you can specify the COM port for PTT, etc.  After that,
well, I don't know.  I haven't done this in a VERY LONG time.

Good luck & 73 - Jim AD1C

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us