[Dx4win] Labeling question

[Kostas SV1DPI]

As I have seen, it doesn't work ok for all printers. For example I have 
a laser printer (HP M1005) which insists to print a4 page... Anyway...
There are 2 places to tell what paper you have.
First in dx4win...
QSO window>QSLs>print QSL labels>Edit
Under paper size box write Custom. Then you will see 2 new boxes named 
"page width" and "page height" where you should write the dimensions of 
your QSL card.
Second...
when you are going to print, your printer needs to know what paper you 
have. If you go to printer's properties you can change the paper also. 
Maybe you need to change it also. Have in mind that maybe this will 
change your settings in dx4win edit window above...
See also my notes on this subject here
http://www.qsl.net/sv1dpi/en/dx4win/printqsos.html

73 Kostas SV1DPI

On 13/11/2014 1:23 μμ, Ricardo Navarrete wrote:
> Hello all,
> I'm trying to print labels directly on the qsl card, I'm wondering what
> paper size do I need to use. I made a good print but one by one because if
> I put into the feed tray of the printer more than one only the first is
> printed....
>
> Any idea????
>
> Thanks
>
> Sent from my Samsung Galaxy III
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>