[Dx4win] mkaking a ic 7200 work with dx4win

[ON4AOI]

Hi Jim
I have made a rigfile for the IC-7100 a few months ago
You probably need only address change and corrected baud rate to work with
the IC-7200

You find it on AD1C downloads

Guy ON4AOI

-----Oorspronkelijk bericht-----
Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
Namens w4rs at earthlink.net
Verzonden: maandag 27 januari 2014 5:11
Aan: dx4win at mailman.qth.net
Onderwerp: [Dx4win] mkaking a ic 7200 work with dx4win

hi all, i have ver 8.05 and need to add the ic-7200 to rig control and to
use its onboard sound card for psk and ritty. the address is 76h and in hex
that is 16.now i have used this with dxlab, but paul your program is sooooo
much better. i have used it since the start. the usb port is port 6 19200,
n,8,1.. command interval is 200 (ms),scan dwell is 1, continous
interrogation , and no intergrogation while transmitting. works fine on
dxlab. hope you guys can tell me how to hook it up to dx4win. 
thanks jim harper, du3/w4rs
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html