[Dx4win] Trouble keeping radio connected to dx4win

[Jim Reisert AD1C]

On Fri, Feb 7, 2014 at 4:44 PM, Robert Anthony
<rflytieanthony at frontier.com> wrote:

> I am having trouble keeping my radio connected with dx4win. I am running it
> with micro-ham interface III. I can connect, but then i get a message that
> connection is closed. I just started using the micro-ham interface III with
> the Idea  of using digital modes and i was interested in doing some rtty
> contests. I started using DM 780 for my rtty and psk31, but i also have to
> have HRD connected to my radio in order to do that. Has anyone tried this
> and if so have they gotten it to work. I have been using dx4win for about 13
> yrs and didn't have any trouble till i wanted to start running digital
> modes.

Bob, it would be helpful if you mentioned the radio model and settings
(i.e. baud rate etc.)

There is no "connection closed" message, I think it says "radio timed
out" or something like that.

I have never had any problems keeping either ICOM or Yaesu radios
connected via the microHAM microKEYER (original) or microKEYER II.  I
assume the USB Keyer III (?) you are using has the same hardware for
the radio interface.

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us