[Dx4win] Using PstRotator program with DX4Win

[Dave Perry]

Dave,

I use V8.05 and I have no issues with pstRotator.  It's a great program and
works well with DX4WIN.  I use the Stop button all the time and I always can
use F11 right after that.  I don't use the Presets as much, but I will try
one when I get home later today.

73,

Dave, N4QS


-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of David Gould
Sent: Wednesday, February 05, 2014 5:56 AM
To: dx4win at mailman.qth.net
Subject: [Dx4win] Using PstRotator program with DX4Win

Is anyone else using this program with DX4Win V7.7?

Also if anyone is using V8.05 I would be interested if it works successfully
with this version?

The issues I have are as follows..

1)  If I use a preset in PstRotator, when I return to DX4Win and do
F11 to move to the bearing in  **THE CALLSIGN ALREADY IN THE LOGGING
WINDOW** the rotator does not turn.

2) The same thing happens if I use the PstRotator STOP button, I can't then
turn to the direction of the current callsign.

The only way round I have found is to click on a different spot - not save
the current QSO - then click back to the wanted spot - not save again. and
then the rotator will turn.

Any report of this working or not-working for other would be useful.

Thanks,

73,
Dave, G3UEG

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html