[Dx4win] Fwd: Re: Freq (kHz)

[W9RPM]

Mike, will see if I get any bites. Thanks, John


-------- Original Message --------
Subject: 	Re: [Dx4win] Freq (kHz)
Date: 	Thu, 28 Aug 2014 13:10:45 -0400
From: 	Mike Rhodes <w8dn at roadrunner.com>
To: 	john at w9rpm.com



...suggest you post this to the DX4Win list as my troubleshooting skills
went out of date years ago but hopefully someone on the list will have
more current skill set. Have you looked at DDutil? This replicates the
CAT port about 6 times and I think the app can even be daisy chained. It
is used extensively with the Flex series of SDR radios.

Mike / W8DN

On 8/27/2014 11:22 PM, W9RPM wrote:
> Mike, well I have posted this on the LP-PAN reflector, and no ideas. I
> am using the FT5000 radio with the LPB2 virtual serial port, NaP3,
> DX4WIN, and CW Skimmer in that order. I have set up the timing so each
> one is longer than the one before it. I am not sure if another Virtual
> Serial Port program would alleviate the problem or not. I am using
> Win7 64 bit. The problem only occurs when more than DX4WIN is running.
>
> 73 John
> On 8/27/2014 7:05 PM, Mike Rhodes wrote:
>> Hmmm... That is certainly an interesting issue you have going there
>> John. I really don't have any idea as to what the root cause might be
>> but, with some more detailed observations, someone else on the list
>> may be able to shed some light on things. I'm thinking the first
>> things of interest would be what rig, panadapter, etc., you are
>> running and if there is any consistency in what programs are running
>> vs when the issue appears. It's not rf getting into things is it
>> (i.e., happens after or during a transmission) is it?
>>
>> Good Luck in your quest for answers,
>> Mike / W8DN
>>
>> On 8/27/2014 3:08 PM, W9RPM wrote:
>>> Mike, I don't  want it gone, but I am having a polling issue with
>>> the Panadapter I use. Been trying to eliminate causes. Been playing
>>> with the polling numbers on the programs, but still happens. If I
>>> have more than DX4WIN running, then sometimes the mode and band
>>> change in the QSO window and the Freq box also. The radio itself
>>> doesn't change.
>>>
>>> So sometimes unless I really pay attention, then the log might have
>>> the mode as RTTY, 20m but the Freq might show 21080 kHz. It will
>>> flip back and forth.
>>>
>>> That's what I am getting at.
>>>
>>> John
>>> On 8/27/2014 11:43 AM, Mike Rhodes wrote:
>>>> If you add your log info off line instead of real time you get no
>>>> info from the radio.
>>>>
>>>> Not trying to be a smart a.. but people screamed for years to have
>>>> the actual frequency appear in the log and, now that it is there,
>>>> someone wants it gone.
>>>>
>>>> Mike / W8DN
>>>> Since Version 0.97
>>>>
>>>>
>>>> On 8/27/2014 12:30 AM, W9RPM wrote:
>>>>> Anyway you can turn it off so that the Frequency of the radio
>>>>> doesn't appear?
>>>>> Thanks, John
>>>>>
>>>>
>>>> ______________________________________________________________
>>>> DX4WIN mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:DX4WIN at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>


-- 
EMAIL: john at w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/
DX and CONTEST CLUB: http://www.w9idx.com/
La Crosse Hams: http://www.lacrossehams.org/
AOL IM: W9RPM
YAHOO: W9RPM