[Dx4win] (no subject)

[ON4AOI]

Marcel I think you have downloaded a driver I made for the IC7600
>From Jim´s webpage that normally isn´t available anymore because of this
behavior
This version was with the possibility to switch between VFO´s for readout
but doesn´t work
Like it should be

Guy ON4AOI,
Just back from NY+DC so will check what version is ok for you tmw after I
get rid of the jetlag
 

-----Oorspronkelijk bericht-----
Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
Namens Marcel ON6UQ
Verzonden: woensdag 11 september 2013 10:16
Aan: DX4WIN at mailman.qth.net
Onderwerp: [Dx4win] (no subject)


Hello all, 


Hello all, 

Have recently installed a IC7600 and a connection established between the
TRX and the laptop with XP via USB ports. 

Both DX4WIN as N1MM works ok . 
When I start DX4WIN , then flashes the VFO frequency readouts of both of VFO
A and B . 
Does anyone have any idea what the reason of this is and what to do? 


In the DX4WIN window 'Freq (khz)' no readout, only a few seconds by pressing
F9 and than disappear. 

Thanks in advance 
MarCEL ON6UQ 

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html