[Dx4win] RTTY with PRO III and Microham USB III

[Kostas SV1DPI]

There is a guide for every microham product and dx4win
Here is what you are looking for...
http://www.microham.com/Downloads/U3_DX4WIN_Setup.pdf

73 Kostas, SV1DPI

Στις 18/10/2013 23:07, ο/η Fred - NA2U έγραψε:
> I'm going to keep trying this until I get it working.  I recently had a hard drive failure.  I reinstalled DX4WIN and reconfigured it.  I found this morning that I was successful in getting PSK31 to work.  Before the disk bit the dust I couldn't get PSK31 or RTTY to work.  One down and one to go.
>
> Using Pro III, Microham USB III interface, have CW on Com5, CW keying on DTR, PTT on RTS, RTTY Comport on Com5.  Trying to use FSK (have extfsk installed/working).  Trying to use MMTTY in DX4WIN.  In DX4WIN, the MMTTY executable:  c:\HAM\mmtty\mmtty.exe
> I saw a note on AD1C's website that indicated that CW and RTTY have to be on different com ports.  But when I try to put RTTY on com 6 I get nothing.  With both on com 5 the transmitter keys (and sticks on keying) but I don't appear to be getting any output.
>
> I would really like to get this working.  RTTY appears to be working OK in N1MM program so MMTTY must be set up correctly.  What might I be missing.
>   
> 73 and thanks!
>   
> Fred/NA2U
> "Wretched excess is just barely enough."
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html