[Dx4win] IC7410

[Doug MM0BJA]

Hans, just took a look at the manuals for these boxes. The default addresses 
are different. You will need, I believe, a CI-V level converter or 
equivalent which connects between radio remote socket and computer serial 
port. The 7400 address is 66H and 7410 80H, the radio and DX4WIN must be the 
same address. For interface information see here : 
http://www.n3fjp.com/w1geeinterface.html and 
http://www.hosenose.com/store/productDetail.aspx?ProdID=6223&PrimaryCatID=45&
Regards,
Doug - GM7SVK



----- Original Message ----- 
From: "Doug MM0BJA" <msg.que at ntlworld.com>
To: <DX4WIN at mailman.qth.net>
Sent: Friday, November 08, 2013 8:56 AM
Subject: Re: [Dx4win] IC7410


> Hello Hans,
>
> Under File Preferences you can select the radio. An external program 
> should not be necessary. On my system the 7410 is not included as yet but 
> perhaps either of the two 7400 configurations may work.
>
> Hope helps, regards,
> Doug - GM7SVK
>
> ----- Original Message ----- 
> From: "Hans Thorgren" <hans at thorgren.se>
> To: <dx4win at mailman.qth.net>
> Sent: Friday, November 08, 2013 8:35 AM
> Subject: [Dx4win] IC7410
>
>
>>I have never connected a rig to DX4WIN but now I want to do so with my 
>>ICOM 7410. I have found a program on ICOMS homepgae but nit the code I 
>>guess I need for that rig. Help please.
>> 73 Hans SM5BRW
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html