[Dx4win] Label printing problem

[Kostas SV1DPI]

I believe the label height is too small for 3 qsos. Try to make it 
bigger or make smaller the used fonts. Double click the name of the 
fonts to change the size (and the fonts).
Maybe my notes help you also... See 
http://users.otenet.gr/~sv1dpi1/en/dx4win/printqsos.html
and better this picture
http://users.otenet.gr/~ahvlasis/pictures/dx4win/labelsheet.jpg to 
understand better how it works.

73 Kostas, SV1DPI

Στις 29/3/2013 21:31, ο/η Dusty Chapman έγραψε:
> I am using Avery type 5160 labels. DX4WIN 8.05.
> Printer is a HP photosmart 7900 series.
> 3 QSL's have been selected
> I hit "Print QSL labels"
> Print via manager is selected
> QSL method - tried ALL & DIRECT
> Then, Edit - Then Preview
> It shows the heading and 3 QSO's on the label
> With lines and no commercial
> (the lines appear to extend past the right
> end of the label, but do not show that way
> on the printed label).
>
> Problem:  only two QSO's are printed on the label
> And the third QSO is on a separate label.
>
> I used to do this and have another line with 73 etc
> de K3WC on the bottom and it all fit on the label
>
> PREFERENCES - tried Rep/Lab at 10 & 8
> and no Messages.
>
> I have read all 5000 pages in the help file on
> QSL printing and cannot see/understand where
> my problem lies.
>
> Any help sure would be appreciated
> 73,
> Dusty - K3WC           k3wc at Verizon dot net
>
>
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html