[Dx4win] PSK-31 Receive Set-up

[Joe Subich, W4TV]

> Does PSK-31 have a different audio-in path than RTTY which needs to
> be  set-up?

Audio input (sound card) is selected separately for RTTY (MMTTY) and
PSK31 (PSKCore).  PSK31 sound card is selected in File | Preferences |
Control PSK Sound card (input) where RTTY sound card is selected in
RTTY Control panel (MMTTY) -> Option (O) | Setup (O) | SoundCard tab.

That information *should* be in the DX4Win help file although I have
not verified its presence.

73,

    ... Joe, W4TV


On 6/25/2013 5:12 PM, Bud Governale wrote:
> I’m still stumped in getting PSK-31 window to see a received audio signal from the K3.
> When I switch to RTTY I see received signals.
> When I switch windows back to  PSK-31 window there are no signals.
>
> Does PSK-31 have a different audio-in path than RTTY which needs to be set-up?
> If RTTY receives audio why doesn't PSK-31 also receive audio?
>
> I went so far as to install another copy of DX4WIN in another folder.
> Same results with no audio seen in PSK-31 window.
>
> Anyone have any clues as to what may be wrong?
>
> 73,
>
> Bud W3LL
> w3ll at arrl.net
>
>
>
> From: Bud Governale
> Sent: Monday, June 24, 2013 4:04 PM
> To: dx4win at mailman.qth.net
> Subject: Re: PSK-31 Receive Set-up
>
> I’ve been using MMTTY with DX4WIN for years.
> Now I want to try PSK-31.
>
> I got stumped on the first step in the setup of PSK31 in DX4WIN manual.
>
> With the PSK31 window open I see no signals or noise on the displays.
> As a test, if I switch to the MMTTY window I see noise. I can change the amplitude of the display noise level using the Line-In soundcard slider.
>
> When I switch back to the PXK31 window there is no visual indication that audio is getting to the PSK321 window - even when moving the Line-In level from zero to max audio in.
>
> If I right click in the gray area of PSK31 window and select RX Volume no window opens.
> I’m using WIN7 with Real Tec sound.
>
> What do I need to do to get PSK31 to see audio in – a received signal?
>
> Transmit works perfectly. I need to get receive to work.
>
> Is there a squelch that needs to be set?
>
> 73,
>
> Bud W3LL
> w3ll at arrl.net
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>