[Dx4win] PSK-31 Receive Set-up

[Kostas SV1DPI]

We had the same idea. The squelch is too high by default in dx4win. Try 
lower it. It is the yellow horizontal line on the left

73 Kostas, SV1DPI

Στις 24/6/2013 23:04, ο/η Bud Governale έγραψε:
> I’ve been using MMTTY with DX4WIN for years.
> Now I want to try PSK-31.
>
> I got stumped on the first step in the setup of PSK31 in DX4WIN manual.
>
> With the PSK31 window open I see no signals or noise on the displays.
> As a test, if I switch to the MMTTY window I see noise. I can change the amplitude of the display noise level using the Line-In soundcard slider.
>
> When I switch back to the PXK31 window there is no visual indication that audio is getting to the PSK321 window - even when moving the Line-In level from zero to max audio in.
>
> If I right click in the gray area of PSK31 window and select RX Volume no window opens.
> I’m using WIN7 with Real Tec sound.
>
> What do I need to do to get PSK31 to see audio in – a received signal?
>
> Transmit works perfectly. I need to get receive to work.
>
> Is there a squelch that needs to be set?
>
> 73,
>
> Bud W3LL
> w3ll at arrl.net
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html