[Dx4win] MicroKeyer2, DX4WIN, HDSDR and Omni-Rig

[Joe Subich, W4TV]

If you are trying to configure a splitter function, you could try
connecting HDSDR/OmniRig to Router's 2nd CAT port.  HDSDR/OmniRig
will be limited to the rig connected to MK II but I assume HDSDR
is limited to following one rig anyway.  There is certainly no way
that OmniRig can connect to two rigs via MK II.  If allowing HDSDR
to use Router's 2nd CAT port does not work, DX4Win will probably need
to provide an OmniRig option - one in which OmniRig serves both HDSDR
and the logger.

Note, if you use Router's 2nd CAT port, it will be necessary to set any
polling from HDSDR/OmniRig to the very minimum (slowest possible) to
prevent overloading the control channel between Router and the MK II.

73,

   ... Joe Subich, W4TV
       microHAM America
       http://www.microHAM-USA.com
       http://groups.yahoo.com/group/microHAM

       support e-mail:  support at microHAM.com


73,

    ... Joe, W4TV


On 6/22/2013 8:06 AM, Radivoj Kar, F6GNZ wrote:
> I have
> updated my shack with an SDR which I want to use for reception only  and keep my existing MK2, FT1000MP+ IC706 (for
> 50 MHz) for transmit only.
> I can control
> SDR with HDSDR program and synchronise FT1000MP/IC706 frequencies/modes via the
> Omni-Rig program interfaced with HDSDR. This combination works perfectly, but
> now my DX4WIN becomes useless as it can’t read nor control the radio, saying “ie_Open,
> device already open” and
> “Could not
> open COM4 for keying, ie_Open, device already open” when I try to Start the Radio.
> So, I can’t
> log the QSOs with related radio data (mode, freq’s) nor use spot clicks to set
> up the TX/RX frequencies,  nor  control my antenna rotator.
> Is there
> any way to make the above combination work together???
> Best 73,
>
> Radi F6GNZ
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>