[Dx4win] DX4WIN and Flex 6500 not connecting

[Dennis Petrich]

Hello Klaus,

 

Thank you for the screen shots, I connected as shown but DX4WIN would not
connect to the 6500 and would time out....  I have no port problems, DX4WIN
worked for years with the Flex 5000A and DDUtil...  I’m stumped as to what’s
going on and need someone from Flex and/or DX4WIN to take a quick look at
why DX4WIN is not talking the lingo required for the 6500’s CAT server
interface....

 

Again, thank you Klaus!

 

Would someone from Flex and/or DX4WIN look to see what the problem is?

 

Thank you,

 

Dennis KØEOO

 

 

  _____  

From: Klaus Lohmann [mailto:FlexRadio-EU at t-online.de] 
Sent: Sunday, July 14, 2013 2:37 AM
To: Dennis Petrich
Subject: RE: DX4WIN and 6500?

 

Hi Dennis,

soon I will uninstall this version of CAT - hence here are the relevant
settings
I have tried. 

Have a nice Sunday,

Klaus
-- 

FlexRadio Systems Representative for EU
"Tune in Excitement!" ™

Klaus Lohmann
SDR-Funktechnik GmbH
Godeke-Michels-Weg 12
D-21762 Otterndorf
GERMANY

Tel.: (+49) 4751 900501
Fax.:(+49) 4751 998569
Cell Phone: 0173 9118080
klaus at flex-radio.com
FlexRadio-EU at t-online.de
info at sdr-funktechnik.de 
www.flexradio.com 


  

"Dennis Petrich" <radioart at frontiernet.net> schrieb: 

Thanks Klaus, appreciate your help!

Cheers,

Dennis KØEOO

  _____  

size=2 width="100%" align=center tabindex=-1> 

From: FlexRadio Systems Europe [mailto:FlexRadio-EU at t-online.de] 
Sent: Saturday, July 13, 2013 10:43 AM
To: Dennis Petrich
Subject: Re: DX4WIN and 6500?

Dennis,

I will set up the PC tomorrow again ... Then I will take the pictures and
send it to you via this channel.

73 de Klaus, DK7XL,


Sent from my iPad


On 13.07.2013, at 17:18, "Dennis Petrich" <radioart at frontiernet.net> wrote:

Klaus, can you take a picture of how you have the Flex CAT panel setup for
the MAIN and SERIAL PORT tabs and send to me?

Thanks,

Dennis KØEOO



  _____  

size=2 width="100%" align=center tabindex=-1> 

From: Klaus Lohmann [mailto:FlexRadio-EU at t-online.de] 
Sent: Saturday, July 13, 2013 2:00 AM
To: Dennis Petrich
Cc: 'Jim Reisert AD1C'; 'Steve Nance'; smartsdr-preview at flexradio.com
Subject: RE: DX4WIN and 6500?

Hello Dennis,

for sure we will have a look at CAT program soon.

Have a nice WE.

Klaus

-- 

FlexRadio Systems Representative for EU
"Tune in Excitement!" ™

Klaus Lohmann
SDR-Funktechnik GmbH
Godeke-Michels-Weg 12
D-21762 Otterndorf
GERMANY

Tel.: (+49) 4751 900501
Fax.:(+49) 4751 998569
Cell Phone: 0173 9118080
klaus at flex-radio.com
FlexRadio-EU at t-online.de
info at sdr-funktechnik.de 
www.flexradio.com 

  

"Dennis Petrich" <radioart at frontiernet.net> schrieb: 

Hello Klaus,

Your preference selections are what I already had except I had COM5
selected.  Still no joy; But now I get a DX4WIN error message saying the
port cannot be connected to because it already exists....    Which it does,
it shows in the device manager under “Flex-radio virtual serial port
(com5)”.

Dennis KØEOO

<hr size=2 width="100%" align=center tabindex=-1> </hr

From: Klaus Lohmann [mailto:FlexRadio-EU at t-online.de] 
Sent: Friday, July 12, 2013 10:51 AM
To: radioart at frontiernet.net
Cc: Jim Reisert AD1C; Steve Nance; smartsdr-preview at flexradio.com
Subject: Re: DX4WIN and 6500?

Dennis,

these were my last settings I´ve used yesterday.
I only changed the ports deliberately - other settings
were found by default.


Hope that helps.

Klaus
-- 

FlexRadio Systems Representative for EU
"Tune in Excitement!" ™

Klaus Lohmann
SDR-Funktechnik GmbH
Godeke-Michels-Weg 12
D-21762 Otterndorf
GERMANY

Tel.: (+49) 4751 900501
Fax.:(+49) 4751 998569
Cell Phone: 0173 9118080
klaus at flex-radio.com
FlexRadio-EU at t-online.de
info at sdr-funktechnik.de 
www.flexradio.com 





<radioart at frontiernet.net> schrieb:
> Thanks Klaus,
> 
> What other information did you put in DX4WIN preferences? Like what radio
name?, what baud rate? and so on....
> 
> 
> Dennis KØEOO
> 
> 
> 
> ----- Original Message -----
> From: "Klaus Lohmann" <FlexRadio-EU at t-online.de>
> To: "Dennis Petrich" <radioart at frontiernet.net>
> Cc: "Jim Reisert AD1C" <jjreisert at alum.mit.edu>, "Steve Nance"
<snance at charter.net>, smartsdr-preview at flexradio.com
> Sent: Friday, July 12, 2013 6:56:00 AM
> Subject: Re: DX4WIN and 6500?
> 
> 
> 
> "Dennis Petrich" <radioart at frontiernet.net> schrieb: 
> 
> 
> 
> 
> I need help, 
> 
> 
> 
> Has anyone in the 6000 group been able to connect DX4WIN V8.05 to the 6700
or 6500? 
> 
> 
> 
> I tried connecting to the CAT port COM5 but NO joy.... 
> 
> 
> 
> Dennis KØEOO 
> 
> 
> 
> 
> 
> 
> Dennis, 
> 
> I could connect 6500 with my demo version of DX4WIN without problems. 
> In preferences I defined COM5. Then I erased COM5 in CAT and ceated COM10
- 
> with preferences set to COM10 again no issue. 
> 
> 
> Klaus 
> 
> -- 
> 
> FlexRadio Systems Representative for EU 
> "Tune in Excitement!" " 
> 
> Klaus Lohmann 
> SDR-Funktechnik GmbH 
> Godeke-Michels-Weg 12 
> D-21762 Otterndorf 
> GERMANY 
> 
> Tel.: (+49) 4751 900501 <callto:04751900501>  
> Fax.:(+49) 4751 998569 <callto:04751998569>  
> Cell Phone: 0173 9118080 <callto:01739118080>  
> klaus at flex-radio.com 
> FlexRadio-EU at t-online.de 
> info at sdr-funktechnik.de 
> www.flexradio.com
>