[Dx4win] operating CW from keyboard and keyer without unplugging

[Dan Violette]

As others said, yes should work.  Make sure the small switch on the back of
the TS-850 is on manual keying (not using internal keyer).  Since you are
using basically 2 external keyers (on/off keying of the line), either keying
will key the radio.

Dan KI6X

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Ed Douglass
Sent: Wednesday, January 09, 2013 8:16 AM
To: dx4win at mailman.qth.net
Subject: [Dx4win] operating CW from keyboard and keyer without unplugging

A question for Jim Reisert:

Using DX4WIN, is it possible to operate CW from a keyboard with a serial
port connection between the computer and the transceiver and then parallel
the output of a keyer (Heathkit uMatic Keyer) with the cable from the serial
port in the plug that goes into the CW jack on a Kenwood TS--850?  

What I am trying to accomplish is to be able to operate CW from a keyboard
OR a paddle/keyer without having to unplug one and plug in the other.

Thanks for your advice.

73 de Ed, AA9OZ

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html