[Dx4win] OmniRig

Radivoj Kar, F6GNZ f6gnz at yahoo.com
Sun Dec 15 13:23:05 EST 2013


Hi,
I have had a success to synchronize mu SDR RX and Icom IC706 using Omnirig and RigSync and having DX4WIN to control IC706 via MicroHAM Router (IC706/DX4WIN on CAT1 and Omnirig/IC706 on CAT2). Unfortunately, there was no way to have DX4WIN control the SDR RX, which would make this setup perfect.

Trying to do same with FT1000MP instead of IC706: many sync delays, MP timeouts due to poliing conflicts which couldn't be handled by the "old" binary CAT protocol of the MP. 

Everything would have been better if DX4WIN had integrated OmniRig support !
73, Radi F6GNZ





Le Vendredi 13 décembre 2013 10h09, William Osborne <wosborne44 at gmail.com> a écrit :
 
Has anyone had any success using the OmniRig software to interface your rig
>to two programs needing access to the rig cat port at the same time, for
>example DX4WIN and a Pan_Adaptor programs?  I do not think Dx4Win will
>operate with it but the SDR-Radio folks are telling me it will?
>
>
>
>Thanks,
>
>William Osborne, K5ZQ
>
><mailto:Wosborne44 at gmail.com> Wosborne44 at gmail.com
>
>207-205-9565
>
>
>
>______________________________________________________________
>DX4WIN mailing list
>Home: http://mailman.qth.net/mailman/listinfo/dx4win
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:DX4WIN at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>
>


More information about the DX4WIN mailing list