[Dx4win] Change QSL Method Field

[Joe Young]

All I needed to do was look at some more menus. Thanks to all. 73, Joe.




On Monday, December 2, 2013 2:16 PM, Jim Reisert AD1C <jjreisert at alum.mit.edu> wrote:
  
Joe, please follow-up to the reflector as well.

Thanks -Jim

On Mon, Dec 2, 2013 at 2:11 PM, Joe Young <w6rll at yahoo.com> wrote:
> Thanks,  Jim. All OK Now. 73 de Joe.
>
>
>
> On Monday, December 2, 2013 2:05 PM, Jim Reisert AD1C
> <jjreisert at alum.mit.edu> wrote:
> On Mon, Dec 2, 2013 at 6:13 AM, Joe Young <w6rll at yahoo.com> wrote:
>
>
>> I want to do a Global Edit on the "QSL Method" field. On page 91 of the
>> existing manual, that choice is shown. When I do the following from the QSO
>> window: QSO: Multiple QSO Operations: a list appears but is does not
>> contain the "Change QSL Method" option. DX4WIN  8.05. Is there another way
>> to accomplish this? Thanks, Joe.
>
>
> QSL | Set QSL Method.
>
> It will change the method for ALL of your QSOs to "x".  You can't
> specify that it only change those set to "y" to "x".  So you will need
> to use some sort of filter to narrow down your log.  For example, if
> you want to change all "Bureau" to "Direct", do an F8 search for
> "Method = Buro", then do the Set QSL Method through the QSL menu.
>
> 73 - Jim AD1C
>
> --
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us/

>
>
>



-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us/