[Dx4win] TF2LL CAT problem

[Kostas SV1DPI]

I have selected Yaesu ft1000mpmkv and both default boxes checked. dtr 
and rts boxes are also checked.
Have in mind that you need a straight cable and for com port properties 
4800,8,n,2

73 Kostas SV1DPI

Στις 1/12/2013 9:40 μμ, ο/η Jim Reisert AD1C έγραψε:
> Please respond to Georg directly, and copy the reflector.  I'm sure
> there are plenty of FT-1000MP users here that could help.
>
> Thanks - Jim AD1C
>
>
> ---------- Forwarded message ----------
> From: Georg Magnússon TF2LL <tf2ll at vesturland.is>
> Date: Mon, Nov 25, 2013 at 2:16 PM
> Subject: TF2LL CAT problem
> To: jjreisert at alum.mit.edu
>
>
> Hello Jim.
>
> After long time I want to give DX4WIN one more change ! I was not
> happy in the beginning so naw I want to try again. I have install
> DX4WIN to may labtop using Flex 3000 and working OK. Then I try to use
> with may FT-1000MP Mark-V I have a problem. I have configure in the
> settings all I know about but Cat is not working. Only small blink on
> the Cat light when I start radio. Small blink on the FT and the
> Navigator. I can see when I start radio and Cat light blink the freq
> change in the capture window.
>
> What can I possible doing wrong, any ideas ?
>
> 73 de TF2LL
>
> Georg.
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>