[Dx4win] 30 meter qso's

[R.T.Liddy]

John,
 
Select as follows:
File
  Preferences
    QSO
      CW freq cutoff - Choose 30m
        Set Frequency (kHz) to 10,150
          File
            Save Changes and Exit
 
Your 30M selection should now come up as CW across the entire Band.
 
If you want to set the SSB lower edge freq on all the Bands you use, follow
the same procedure and enter that specific freq.
 
GL/73,    Bob K8BL


--- On Sun, 9/16/12, W5JMW <w5jmw at cableone.net> wrote:


From: W5JMW <w5jmw at cableone.net>
Subject: [Dx4win] 30 meter qso's
To: DX4WIN at mailman.qth.net
Date: Sunday, September 16, 2012, 8:20 PM


I have a question for the group.The default setting on 30m(10.1) appears to be ssb.If I click on a dxspot to log that station the default is ssb.Of course that can not be and must be changed.I know it is very simple to change this.Is there a way so 30m defaults cw? thanks all,73 john
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html