[Dx4win] DX4WIN v8.05 Settings for ICOM-728 Radio as 2nd Radio

[Jim Reisert AD1C]

On Sat, Oct 27, 2012 at 6:22 PM, Ken Leon <kenl at msn.com> wrote:

> My primary rig is Yaesu-990 with Serial Interface for DX4WIN v8.05 on COM3
> to Lenovo laptop running WIN7 64 bit.
>
> My older ICOM-728 works well with COM4 via USB to CI-V cable to secondary
> laptop. How can I configure as Radio #2  on primary laptop.

In DX4WIN, go to Preferences | Radio. In the "Second Radio" section,
choose Type == "ICOM 756".  In the Address box, unclick "Default" and
enter "38".    In the Baud rate box, unclick Default then enter the
baud rate your radio is set to.  Set COM Port to the COM port on your
computer that the IC-728 is connected to.

After saving your preferences, you should be able to use
"Shift-Control-F12" to switch DX4WIN to the second radio.  Type F9 and
see if it is tracking your band changes on that radio.

73 - Jim AD1C

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us