[Dx4win] Radio Timeout

[John Silva N3AM]

I run a K3 with Win7, and only get a radio timeout after pressing the 
"REV" button for about 15 seconds.  I do not get a radio timeout if I 
use the "A/B" button to hear the split frequency.  I'm pretty sure 
this was the same when I ran Win XP with the K3 and, before that, 
with the TS-850.


73,
John, N3AM

At 03:13 10/12/2012, Dave Perry, N4QS wrote:
Date: Thu, 11 Oct 2012 22:13:06 -0500
From: "Dave Perry, N4QS" <n4qs at comcast.net>
Subject: Re: [Dx4win] Radio Timeout
Sender: dx4win-bounces at mailman.qth.net
To: "'Thomas Lutz'" <telutz at earthlink.net>, <dx4win at mailman.qth.net>
Reply-to: n4qs at comcast.net

Tom,

I do not run Windows 7, but my K3 works great with DX4WIN.  I run XP and I
use the K3 X4 file within DX4WIN as my radio file.  I log everything in real
time without a problem.  Feel free to email direct to discuss in more
detail.

Dave, N4QS

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Thomas Lutz
Sent: Thursday, October 11, 2012 4:49 PM
To: dx4win at mailman.qth.net
Subject: [Dx4win] Radio Timeout

I am running a K3 with DX4WIN, 8.05.  Computer is running Windows 7.

When I am working split, going from the listening frequency to the transmit
frequency to hear the pile up, causes the radio to time out.  I use the XFC
button to do this.  Any ideas?

Tom, W0ZR