[Dx4win] Use with VE7CC

[Mel Martin]

Small edit to example filter set-up macro... a newline was dropped in my cut
and paste...

acc/sp 1 on HF and by_zone 1,2,3,4,5,6,7,8,9,10,11,14,33,35,40
acc/sp 2 on VHF and (call_zone 2,4,5 or by_zone 2,4,5)
rej/sp 1 by w3lpl

An explanation of the above...

On 160-10 I want to see spots from NA and Western EU
On  6 and up just from spotters or stations on the East Coast
Reject W3LPL spots

You can also refine it by band or range of bands if you wish... just use the
help command or consult the on-line documentation

Once you set up your filters on a DX cluster they will be persistent over
time unless the sysop does a major reset...

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Mel Martin
Sent: November 9, 2012 21:17
To: 'Ray Benny'; 'Jim Reisert AD1C'
Cc: 'DX4WIN Reflector'
Subject: Re: [Dx4win] Use with VE7CC

My playbook is playing tricks on me so I'll try again from my desktop.

VE7CC's software does not filter anything... it just provides a GUI to set
up filters on the spot server. You can do the same with DX4Win my creating a
macro file and invoking it with a macro key. The exact commands vary with
the type of server. I usually use DXSpider so here is an example DXSpider
file:

acc/sp 1 on HF and by_zone 1,2,3,4,5,6,7,8,9,10,11,14,33,35,40
acc/sp 2 on VHF and (call_zone 2,4,5 or by_zone 2,4,5) rej/sp 1 by w3lpl

You can do the same for AR Cluster, but the actual commands will be
different

Documentation can be found for each server type... the ones I know about are
AR Cluster (ve7cc server side), PacketCluster (the original), DXSpider
(multi-platform clone of PacketCluster)

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Ray Benny
Sent: November 9, 2012 19:09
To: Jim Reisert AD1C
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Use with VE7CC

Is there a way to easily select bands/filter bands ln DX4WIN like VE7CC does
it? I spent alot of time on one band only and it drives me crazy to have the
one spot that I am looking for go off the screen before I can click on it!

I have asked some other DX4WIN users but they say no.

Ray,
N6VR

On Fri, Nov 9, 2012 at 1:57 PM, Jim Reisert AD1C
<jjreisert at alum.mit.edu>wrote:

> On Fri, Nov 9, 2012 at 10:15 AM, Tom Berry AA4VV wrote:
>
> > I would like to use VE7CC for my spots in DX4WIN.   The problem I would
> > like to only look at 20, 17, 15, 12, 10 meters.  I try loading VE7CC 
> > and setting it up then exit and run DX4WIN and using VE7CC for spots.
It
> > still shows 160, 80, 40.   Is there a way to do this?
>
> http://dx4win.ad1c.us/cluster/index.html#VE7CC
>
> Also, you can "gray out" bands using the PACKET3 tab of your preferences.
>
> --
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us 
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html
>
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html