[Dx4win] control PW-1 using Ten Tec Orion-2

[Joe Subich, W4TV]

> Or better still someone come up with a computer box that would
> convert the low going leads, per band, of the Orion-2 to an
> appropriate CI-V command that would be sent to the PW-1.

microHAM microKEYER II and DigiKeyer II provide an optional, isolated
auxiliary CI-V output based on the radio control commands suitable
for controlling PW-1 from any supported transceiver (Ten-Tec, Elecraft,
Kenwood or Yaesu) in addition to Icom.  microHAM Station Master can
provide the same isolated CI-V output in a band decoder vs. digital/CW
interface.

Information is in the respective User Manuals (available on the web
at www.microHAM-USA.com/downloads.html) in the "system" tab for MKII
and DKII and "PA Port" for Station Master.  Generalized connection
diagrams for each of the options (please specify) are available from
info at microHAM-USA.com.

73,

    ... Joe Subich, W4TV
        microHAM America, LLC.
        http://www.microHAM-USA.com
        http://groups.yahoo.com/group/microHAM


On 3/25/2012 9:09 AM, George wrote:
> I wonder if Paul has any intention of including control of the PW-1 amp from
> non Icom transceivers? It could be included in the CONTROL of the
> PREFERENCES to send a CI-V command out a serial port and then be level
> converted to a CI-V cable to the PW-1.
> Or better still someone come up with a computer box that would convert the
> low going leads, per band, of the Orion-2 to an appropriate CI-V command
> that would be sent to the PW-1.
> Anyone heard of this request?
> Thanks.
>
> George  W2YJ
>
>
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--