[Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer

Tue Mar 20 12:29:31 EDT 2012

If you are using in Yaesu rigs high tones (2125Hz) than you must use reverse
mode for transmitting. It is possibe to adjust it in YAESU menu "rtty T
PLRTY" or in Router
setup.

That is for RTTY LSB!

73,

Milos, OK1MP

----------------------------------------------------------------------

Message: 1
Date: Mon, 19 Mar 2012 12:43:23 -0700 (PDT)
From: "Radivoj Kar, F6GNZ" <f6gnz at yahoo.com>
Subject: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer
To: DX4WIN Refelector <dx4win at mailman.qth.net>
Message-ID:
	<1332186203.53733.YahooMailNeo at web110304.mail.gq1.yahoo.com>
Content-Type: text/plain; charset=utf-8

I've decided to try FSK (no AFSK) with microHAM keyer and have configured
router, DX4WIN and associated MMTTY for FSK as indicated in Router
documentation. RX is ok, on TX FSK COM5 port well indicates 45.5N1.5 and my
FT1000MP goes to transmitt in RTTY LSB mode, I can change output power and
MMTTY display shows normal RTTY display at TX, but nobody answers my calls
on their frequency ! I have no test bench nor another RX at hand to check
what might be happening. Has anybody an idea what's going on??? 
73, Radi F6GNZ

------------------------------

Message: 2
Date: Mon, 19 Mar 2012 16:05:50 -0400
From: "Joe Subich, W4TV" <lists at subich.com>
Subject: Re: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer
To: dx4win at mailman.qth.net
Message-ID: <4F67919E.5090404 at subich.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

> I can change output power and MMTTY display shows normal RTTY
> display at TX, but nobody answers my calls on their frequency !

Do you have another receiver to determine if you have set up the
FT-1000MP correctly?  As shipped from Yaesu (default), almost all
Yaesu transceivers (including all models of the FT-1000 series)
will transmit "upside down" in RTTY.  It generally necessary to
set Menu 6-1 (FT-1000MP, MK V, etc.) to REV or DIP switch 5
(FT-1000, FT-1000D) to "0" for the resulting FSK to be "right
side up".

73,

    ... Joe, W4TV

On 3/19/2012 3:43 PM, Radivoj Kar, F6GNZ wrote:
> I've decided to try FSK (no AFSK) with microHAM keyer and have
configured router, DX4WIN and associated MMTTY for FSK as indicated in
Router documentation. RX is ok, on TX FSK COM5 port well indicates
45.5N1.5 and my FT1000MP goes to transmitt in RTTY LSB mode, I can
change output power and MMTTY display shows normal RTTY display at TX,
but nobody answers my calls on their frequency ! I have no test bench
nor another RX at hand to check what might be happening. Has anybody an
idea what's going on???
> 73, Radi F6GNZ
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

------------------------------

Message: 3
Date: Tue, 20 Mar 2012 09:11:36 +1300
From: "John Shaw" <jnshaw at compassnet.co.nz>
Subject: Re: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer
To: <dx4win at mailman.qth.net>
Message-ID: <4CBA5635B77F421CA23A3DC401BE5E8F at john8c10>
Content-Type: text/plain;	charset="us-ascii"

 Radi,

One of the mysteries if RTTY. Mr Yaesu thinks normal RTTY is USB, this is a
great RTTY debate for another day perhaps.  I am guessing you RTTY signals
are reversed. So either operate RTTY USB or in the FT1000MP there is a menu
6-1 that allows you to reverse the RTTY which will allow you to continue
RTTY LSB.

73 John ZL1BYZ.

-----Original Message-----
From: dx4win-bounces at mailman.qth.net [mailto:dx4win-bounces at mailman.qth.net]
On Behalf Of Radivoj Kar, F6GNZ
Sent: Tuesday, 20 March 2012 08:43
To: DX4WIN Refelector
Subject: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer

I've decided to try FSK (no AFSK) with microHAM keyer and have configured
router, DX4WIN and associated MMTTY for FSK as indicated in Router
documentation. RX is ok, on TX FSK COM5 port well indicates 45.5N1.5 and my
FT1000MP goes to transmitt in RTTY LSB mode, I can change output power and
MMTTY display shows normal RTTY display at TX, but nobody answers my calls
on their frequency ! I have no test bench nor another RX at hand to check
what might be happening. Has anybody an idea what's going on??? 
73, Radi F6GNZ
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

------------------------------

_______________________________________________
DX4WIN mailing list
DX4WIN at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

End of DX4WIN Digest, Vol 95, Issue 22
**************************************