[Dx4win] DX4WIN and Windows 7
Jesse Wall
ka8yyz at netscape.com
Wed Jan 25 16:17:52 EST 2012
Steve,
I have DX4WIN version 8.05 installed on both Win7-64 bit and 32-bit. Runs with no problem. If you use the LPT port for CW keying you have to install a driver (No experience her, as I use my keyer and paddle).
Install was no problem in the default folder. If you try to install in the Program Files or Program Files (x86) folder, you may run into some issues. Windows 7 denies browsing access to these folders by default and it causes problems with some apps, so I really recommend you install to C:\dx4winxxx.
73,
Jesse, KA8YYZ
--- dx4win-request at mailman.qth.net wrote:
From: dx4win-request at mailman.qth.net
To: dx4win at mailman.qth.net
Subject: DX4WIN Digest, Vol 93, Issue 27
Date: Wed, 25 Jan 2012 12:06:06 -0500
Send DX4WIN mailing list submissions to
dx4win at mailman.qth.net
To subscribe or unsubscribe via the World Wide Web, visit
http://mailman.qth.net/mailman/listinfo/dx4win
or, via email, send a message with subject or body 'help' to
dx4win-request at mailman.qth.net
You can reach the person managing the list at
dx4win-owner at mailman.qth.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of DX4WIN digest..."
Today's Topics:
1. DX4WIN and Windows 7 (Steve GW4BLE)
2. Re: DX4WIN and Windows 7 (S.K.)
3. Re: DX4WIN and Windows 7 (Kostas Stamatis)
4. Re: DX4WIN and Windows 7 (Jim Reisert AD1C)
5. Re: DX4WIN and Windows 7 (Jim Reisert AD1C)
6. Re: DX4WIN and Windows 7 (Kurt Zimmerman)
7. Re: DX4WIN and Windows 7 (Mel)
8. Re: DX4WIN and Windows 7 (Jim Reisert AD1C)
----------------------------------------------------------------------
Message: 1
Date: Tue, 24 Jan 2012 18:24:40 -0000
From: "Steve GW4BLE" <steve.gw4ble at btconnect.com>
Subject: [Dx4win] DX4WIN and Windows 7
To: <Dx4win at mailman.qth.net>
Message-ID: <000101ccdac5$71b21350$551639f0$@gw4ble at btconnect.com>
Content-Type: text/plain; charset="us-ascii"
My old faithful PC running XP is getting a bit long in the tooth, so I have
a new W7 machine on order.
This may well have been covered off on previous posts, I admit to not yet
having done a complete search, but what's the current thinking on pit falls
to be aware of when doing a new installation ?
(this, or similar, will be on the microHAM & Writelog reflectors also, so
apologies if you read this more than once)
Steve
GW4BLE
------------------------------
Message: 2
Date: Tue, 24 Jan 2012 10:24:35 -0800 (PST)
From: "S.K." <kx9x at yahoo.com>
Subject: Re: [Dx4win] DX4WIN and Windows 7
To: Steve GW4BLE <steve.gw4ble at btconnect.com>,
"Dx4win at mailman.qth.net" <Dx4win at mailman.qth.net>
Message-ID:
<1327429475.18296.YahooMailNeo at web130102.mail.mud.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
This is timely... I have a Windows 7 64-bit machine on order as well, and have the same questions.
Sean Kutzko
Amateur Radio KX9X
________________________________
From: Steve GW4BLE <steve.gw4ble at btconnect.com>
To: Dx4win at mailman.qth.net
Sent: Tuesday, January 24, 2012 1:24 PM
Subject: [Dx4win] DX4WIN and Windows 7
My old faithful PC running XP is getting a bit long in the tooth, so I have
a new W7 machine on order.
This may well have been covered off on previous posts, I admit to not yet
having done a complete search, but what's the current thinking on pit falls
to be aware of when doing a new installation ?
(this, or similar, will be on the microHAM? & Writelog reflectors also, so
apologies if you read? this more than? once)
Steve
GW4BLE
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
------------------------------
Message: 3
Date: Tue, 24 Jan 2012 22:06:31 +0200
From: "Kostas Stamatis" <sv1dpi at otenet.gr>
Subject: Re: [Dx4win] DX4WIN and Windows 7
To: "REFLECTOR dx4win" <dx4win at mailman.qth.net>
Message-ID: <333ADE2DB4F44CF1A3D303850747F572 at sv1dpimain>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
GL with the new computers.
I prefer XP for ham use but i use win 7 in my laptop which occasionaly use
for ham radio. Install dx4win outside programs directory. MMTTY also.
Generally ham programs is good to install outside programs directory. This
is probably because our programs usually update themselves. Writelog goes to
its default directory but is has solved many problems it had at the start.
Microham router works ok but you can not manage soundcard via router
anymore. Windows keeps this function for them.
Finally i think that win7 are good, maybe better than xp for general use but
not for ham radio... Ofcourse this is my opinion only
73 Kostas sv1dpi
----- Original Message -----
From: "S.K." <kx9x at yahoo.com>
To: "Steve GW4BLE" <steve.gw4ble at btconnect.com>; <Dx4win at mailman.qth.net>
Sent: Tuesday, January 24, 2012 8:24 PM
Subject: Re: [Dx4win] DX4WIN and Windows 7
> This is timely... I have a Windows 7 64-bit machine on order as well, and
> have the same questions.
>
>
> Sean Kutzko
> Amateur Radio KX9X
>
>
> ________________________________
> From: Steve GW4BLE <steve.gw4ble at btconnect.com>
> To: Dx4win at mailman.qth.net
> Sent: Tuesday, January 24, 2012 1:24 PM
> Subject: [Dx4win] DX4WIN and Windows 7
>
> My old faithful PC running XP is getting a bit long in the tooth, so I
> have
> a new W7 machine on order.
>
> This may well have been covered off on previous posts, I admit to not yet
> having done a complete search, but what's the current thinking on pit
> falls
> to be aware of when doing a new installation ?
>
> (this, or similar, will be on the microHAM & Writelog reflectors also, so
> apologies if you read this more than once)
>
>
> Steve
> GW4BLE
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
------------------------------
Message: 4
Date: Tue, 24 Jan 2012 14:00:55 -0700
From: Jim Reisert AD1C <jjreisert at alum.mit.edu>
Subject: Re: [Dx4win] DX4WIN and Windows 7
To: Steve GW4BLE <steve.gw4ble at btconnect.com>
Cc: Dx4win at mailman.qth.net
Message-ID:
<CAK-n8j4BJFNT-E=fpXYxkXWc4HFJ+qQY7iFzGmsV9mWXocRPTA at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On Tue, Jan 24, 2012 at 11:24 AM, Steve GW4BLE wrote:
> This may well have been covered off on previous posts, I admit to not yet
> having done a complete search, but what's the current thinking on pit falls
> to be aware of when doing a new installation ?
DX4WIN runs just find on Windows Vista/7, if you install it in the right place!
If you are re-installing v.7 or earlier, the default installation path
will be something like:
C:\Program Files\dx4win
I recommend NOT putting the program there, instead install here:
C:\dx4win
Windows Vista/7 puts special protections on the files in the Program
Files directory, making them difficult to change or even find in some
cases. You can google search for "Windows Virtual Store" and read
more if you wish.
DX4WIN v.8 installs in C:\dx4win by default.
Remember that if you re-install from the original installation file,
the data files will be as old as that file -- they are NOT updated
when new files come out. Use the DX4WIN Data Updater to get the
latest files:
http://dx4win.ad1c.us/updater/
--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
------------------------------
Message: 5
Date: Tue, 24 Jan 2012 15:32:29 -0700
From: Jim Reisert AD1C <jjreisert at alum.mit.edu>
Subject: Re: [Dx4win] DX4WIN and Windows 7
To: Kurt Zimmerman <kzimmerm at yahoo.com>
Cc: "Dx4win at mailman.qth.net" <Dx4win at mailman.qth.net>
Message-ID:
<CAK-n8j64QQY4JYGNtE5bXYrxJaYHTBCkiAFfiDx1nc1NVCSxRQ at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On Tue, Jan 24, 2012 at 2:18 PM, Kurt Zimmerman wrote:
> Thanks Jim for your response. I am still getting the vichw11.sys error : Please copy the driver file: C:\dx4w604\DRIVERS\vichw11.sys To: C:\Windows\system32\Drivers\vichw11.sys
>
> Did that and still get the same error
Right-click on the DX4WIN program icon and choose "Run as
Administrator". This should allow the program to copy the driver
file.
Remember, version 6.0x came out many years before Vista and Windows 7.
If you need LPT keying, you're best off upgrading to DX4WIN 8.
--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
------------------------------
Message: 6
Date: Tue, 24 Jan 2012 15:44:29 -0800 (PST)
From: Kurt Zimmerman <kzimmerm at yahoo.com>
Subject: Re: [Dx4win] DX4WIN and Windows 7
To: Jim Reisert AD1C <jjreisert at alum.mit.edu>
Cc: "Dx4win at mailman.qth.net" <Dx4win at mailman.qth.net>
Message-ID:
<1327448669.82874.YahooMailNeo at web130204.mail.mud.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
It may be best for me to upgrade... FYI, I've attempted to run as admin and still the same error.
?
Kurt W. Zimmerman My Profile:
http://www.linkedin.com/in/kurtwzimmerman
http://westchesternycomputerrepairs.com/
http://www.zazzle.com/kathymaf
Twitter: @kzimmerm
________________________________
From: Jim Reisert AD1C <jjreisert at alum.mit.edu>
To: Kurt Zimmerman <kzimmerm at yahoo.com>
Cc: "Dx4win at mailman.qth.net" <Dx4win at mailman.qth.net>
Sent: Tuesday, January 24, 2012 5:32 PM
Subject: Re: [Dx4win] DX4WIN and Windows 7
On Tue, Jan 24, 2012 at 2:18 PM, Kurt Zimmerman wrote:
> Thanks Jim for your response. I am still getting the vichw11.sys error : Please copy the driver file: C:\dx4w604\DRIVERS\vichw11.sys To: C:\Windows\system32\Drivers\vichw11.sys
>
> Did that and still get the same error
Right-click on the DX4WIN program icon and choose "Run as
Administrator".? This should allow the program to copy the driver
file.
Remember, version 6.0x came out many years before Vista and Windows 7.
If you need LPT keying, you're best off upgrading to DX4WIN 8.
--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
------------------------------
Message: 7
Date: Tue, 24 Jan 2012 18:57:23 -0500
From: Mel <ve2dc at videotron.ca>
Subject: Re: [Dx4win] DX4WIN and Windows 7
To: Steve GW4BLE <steve.gw4ble at btconnect.com>
Cc: Dx4win at mailman.qth.net
Message-ID: <4F1F4563.4030302 at videotron.ca>
Content-Type: text/plain; CHARSET=US-ASCII; format=flowed
The main issue with Vista onwards is the Directory trees "Program Files"
and "Program files (x86)" are not normally writable... a change long
overdue. What I did to get around this was create a new directory tree I
call "programs" and install there, along with some other ham stuff that
would have the same issues. The only other issue is the installation of
the LPT driver if you need it. Just follow the directions.
On 2012-01-24 13:24, Steve GW4BLE wrote:
> My old faithful PC running XP is getting a bit long in the tooth, so I have
> a new W7 machine on order.
>
> This may well have been covered off on previous posts, I admit to not yet
> having done a complete search, but what's the current thinking on pit falls
> to be aware of when doing a new installation ?
>
> (this, or similar, will be on the microHAM& Writelog reflectors also, so
> apologies if you read this more than once)
>
>
> Steve
> GW4BLE
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
------------------------------
Message: 8
Date: Tue, 24 Jan 2012 17:31:40 -0700
From: Jim Reisert AD1C <jjreisert at alum.mit.edu>
Subject: Re: [Dx4win] DX4WIN and Windows 7
To: Kurt Zimmerman <w2mw at amsat.org>
Cc: "Dx4win at mailman.qth.net" <Dx4win at mailman.qth.net>
Message-ID:
<CAK-n8j55V1XajuJB4S=Q-oazUZxQp2vOPFTkyaYRpBoh0QA8cA at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
On Tue, Jan 24, 2012 at 4:44 PM, Kurt Zimmerman <kzimmerm at yahoo.com> wrote:
> It may be best for me to upgrade... FYI, I've attempted to run as admin and
> still the same error.
You can download the "demo" version of 8.05 and try it out, it won't
break your existing installation. MAKE SURE to copy your .DXL (log)
file first to the new DX4WIN save directory, and open *that* file, not
the one in your 6.04 directory. DX4WIN will convert the file format,
and once saved, there's no going back to 6.04.
Also make sure to update all the data files, the ones in the
installation file are old.
- Jim
--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
------------------------------
_______________________________________________
DX4WIN mailing list
DX4WIN at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
End of DX4WIN Digest, Vol 93, Issue 27
**************************************
_____________________________________________________________
Netscape. Just the Net You Need.
More information about the DX4WIN
mailing list