[Dx4win] Just Joined - Update
Rick Murphy
k1mu at arrl.net
Tue Jan 17 10:47:56 EST 2012
On Tue, Jan 17, 2012 at 10:27 AM, Bill McDowell <k4cia at earthlink.net> wrote:
> I am one of the stations Rick contacted about missing State Info.
>
> Here is what I have found that may be causing the problem.
>
> Importing an ADIF file from N1MM into DX4WIN after a contest, and then
> uploading the resulting DX4WIN ADIF file to LoTW will produce the error.
> Only my call (K4CIA) and United States of America will show in the QSO
> detail. My TQSL file has all the correct information, but it does not
> transfer to a QSO from the imported N1MM files. QSOs from my normal DX4WIN
> QSOs show the proper Detail...state/zone, etc.
>
> No idea why but maybe some of you smarter guys can figure it out and post
> a fix. Further, my N1MM configuration has everything correct as well.
>
If your logs on Logbook of the World do not contain state information,
that's because you did not select a state when you configured your station
location in TQSL. The state information doesn't come from your logbook
(either N1MM or DX4WIN).
Start up TQSL on your system and chose "Edit Locations" from the "Station"
menu.
>From the "Edit Station Locations" menu, click on the location that you're
using and then click "Edit..." to start up the location wizard.
The first page has your Grid Square info and zones. Click "Next" once those
are correct.
The next page has your State and County. Those are probably empty in your
case (or, they were empty when you signed your log initially). Once those
are correct, click "Next" again.
Click "Finish" to complete the wizard.
Now you can re-export the QSOs in question, sign them using TQSL, and
re-upload to LoTW. Those will now have a state defined for your station
location.
73,
-Rick
--
Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA
More information about the DX4WIN
mailing list