[Dx4win] Correcting LOG errors

[Jim Reisert AD1C]

On Fri, Feb 3, 2012 at 2:23 PM, Larry Emery K1UO wrote:

> I have about 25 Log entries in DX4Win ver 8.05 that have an error between
> the BAND data and the FREQ(Khz) box data.
>
> For example:  QSO says it was a 20M cw qso but the FREQ box reads 1,815.50.
>
> Should I assume the FREQ box is correct since it reads directly from the
> radio and I need to change the BAND data to reflect the proper Band Info?

When this has happened to me (and it did as recently as last night),
the FREQ was correct, the BAND and MODE were wrong.  I've never seen
it fail the other way around.

I have asked Paul to add an enhancement to DX4WIN that compares the
BAND and FREQ on import (if both are present) to see if they agree.
You would still have to decide which one to believe, but at least you
would know there was a mismatch.

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us