[Dx4win] QSL Labels

[Dick Flanagan]

First make sure every QSL you want to print has the Print flag set to Y. 
  Then make sure you select every QSO that contains any QSL you want to 
print.  That sounds awkward, but just quickly do an F8 search with blank 
criteria which will effectively select the entire log file.  Then select 
QSL Print.

If you still don't print multiple QSOs on your labels, check that your 
Group selections are the same and that your QSL methods are the same. 
Like Art says, be sure that you aren't printing both Tnx and Pse labels 
or that some QSOs list a Manager and some don't.

Usually when I see I'm only printing one of many labels it is because I 
only have one QSO selected.  When I select the entire log as above my 
problems are usually solved.

Dick
--
Dick Flanagan K7VC
dick at k7vc.com

On 2/1/2012 2:33 PM, W9RPM wrote:
> Art, Hi there. I have never done anything with Group Names, or changed
> anything here. Just can't figure it out. Any ideas anyone? 73 John
>
> On 2/1/2012 3:02 PM, Art - W6KY wrote:
>> Ver 8.05 here.  Multiple QSO's printing OK.
>> If your group names are not the same, DX4WIN
>> will print separate labels. Also Tnx and Pse QSL.
>> Different QSL routes. Mgr vs No Mgr. Font size.
>> Especially Call Sign font...
>> All these and probably more will cause multiple labels.
>>
>> 73, Art  W6KY
>>
>>
>> ________________________________
>> From: W9RPM<john at w9rpm.com>
>> To: DX4WIN<dx4win at mailman.qth.net>
>> Sent: Wed, February 1, 2012 9:16:52 AM
>> Subject: [Dx4win] QSL Labels
>>
>> Having a problem with the printing of multiple QSO's on a Label. It is
>> printing them all separate. I have the Max QSOs set to 3, but it still
>> prints every QSO from the same call separate. Plenty of room on the
>> label also. Any help appreciated. Thanks, John W9RPM
>>
>