[Dx4win] Please help with this problem if you can!!!!

[Garry Shapiro]

For some time, I have noticed that my cluster  configuration (CC USER 
and DX4WIN 8.05) only lists some--not all--spots. I chose "minutes ago" 
rather than absolute times, and I don't know if that is a factor.

When I have had a populated spot screen for some time and do a sh/dx in 
the packet window, it seems that previously missing spots are always 
added. I have taken to not depending upon the cluster for info.

Garry, NI6T

On 8/7/2012 2:54 PM, Karl Oyster wrote:
> Hi folks.
>
>   
>
> I noticed about three days ago that DX4W8.05 had stopped showing spots in
> the DX window.  I'm using VE7CC's AR user program and connecting to VE7CC
> through the AR user software --- same as I have been doing for several
> years.
>
>   
>
> If I do a "sh/dx" command, the DX window will populate with the info which
> is returned via telnet; however, when the spots come in one at a time, as
> they normally do during operation, the DX window totally ignores them.
>
>   
>
> I've checked the configuration files of the AR user program and they appear
> to be correct; also, since the spots do appear in the "packet" window, I
> don't think the AR user program is the culprit.  I've also checked all (I
> think) of the various settings under "preferences" for DX4W, including
> changing one at a time then testing the result, with no effect.
>
>   
>
> Anybody have any ideas about what is going on here??  All thoughts will be
> appreciated!
>
>   
>
> Thanks and 73,
>
>   
>
> Karl, K1KO
>
> Virginia Beach, VA
>
>   
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>