[Dx4win] (no subject)

[Kostas Stamatis]

I use com8 for ptt (file>preferences rts ptt)
com7 (different) for mmtty. To do this i run mmtty outside dx4win and put 
under option>setup mmtty>tx com7
Also under misc com-txd

and works
Feel free to ask for more help outside reflector
73 Kostas sv1dpi

----- Original Message ----- 
From: "David J. Strout" <djsatty at comcast.net>
To: "DX4WIN reflector" <dx4win at mailman.qth.net>
Sent: Sunday, October 23, 2011 5:14 PM
Subject: [Dx4win] (no subject)


> Unfortunately, I am back to the same old problem.
> Don't have COM-TxD (FSK) as a choice under TX Port in MMTTY.
> Using WinXP and RigBlaster plus.
> I get keying of the rig but only a carrier. Can some one point
> me in the right direction, pse.
> Dave, W2YC
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html