[Dx4win] QSX Info

[Jim Reisert AD1C]

On Mon, Nov 21, 2011 at 5:23 PM, John Holmes <w9ily at arrl.net> wrote:

> However the QSX frequency for my "spot" always is 0.00.

I am going to assume you are using an ICOM radio.  ICOM radios do not
have a split bit inside the frequency control logic that software like
DX4WIN can read to determine whether the radio is transcieve or split,
so the software always defaults to transceive.  Only the -7600, -7700
and -7800 have added this feature (with updated firmware), but Paul
hasn't quite got all the kinks worked out yet.  I've been using it
with my IC-7600 and while the QSX frequency is recorded in my log and
I can spot the QSX frequency, there are some polling issues which
interfere with tuning the Tx VFO when in split mode.

If it's NOT an ICOM radio, then I don't have a good guess.

You also don't say which version of DX4WIN you are using.

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us