[Dx4win] TS-480 best choice to set radio interface

[Loren Hunt]

TS2000 did it. For some reason the TS480 file I was provided didn't work. I will compare files this weekend if the WPX activity is low...  All working fine now.

73
AD6ZJ, Loren

--- On Wed, 5/25/11, Kostas Stamatis <sv1dpi at otenet.gr> wrote:

From: Kostas Stamatis <sv1dpi at otenet.gr>
Subject: Re: [Dx4win] TS-480 best choice to set radio interface
To: "REFLECTOR dx4win" <dx4win at mailman.qth.net>
Cc: ad6zj at sbcglobal.net
Date: Wednesday, May 25, 2011, 3:49 AM

I have cat control for my ts480 via internet (remoterig) but must be the same.
I have kenwood 2000 as radio
Baud rate is 9600
address 00
poll rate 500
max tries 2
dtr and rts are high (checked)
73 Kostas sv1dpi

----- Original Message ----- From: "Loren Hunt" <ad6zj at sbcglobal.net>
To: <DX4WIN at mailman.qth.net>
Sent: Wednesday, May 25, 2011 7:45 AM
Subject: Re: [Dx4win] TS-480 best choice to set radio interface


> Thanks for all the advice. I'm still having difficulties. I no long have the error that the rig doesn't support the frequency but when I double click on a spot the radio makes a short blip and doesn't change frequencies. Still sorting that out.
> 
> Just to be sure I launch my old logging software and setup the TS480. It connected and I can set frequency TX and such. So there must still be something I'm not setting correctly with DX4WIN.
> 
> DX4WIN is able to read band and mode information from the rig but going the other way there is an issue.
> 
> Any ideas?
> 
> AD6ZJ, Loren
> 
> 
> --- On Mon, 5/23/11, ON4AOI <on4aoi at skynet.be> wrote:
> 
> From: ON4AOI <on4aoi at skynet.be>
> Subject: RE: [Dx4win] TS-480 best choice to set radio interface
> To: ad6zj at sbcglobal.net
> Date: Monday, May 23, 2011, 9:15 PM
> 
> Here it is
> 
>> -----Oorspronkelijk bericht-----
>> Van: dx4win-bounces at mailman.qth.net [mailto:dx4win-
>> bounces at mailman.qth.net] Namens Loren Hunt
>> Verzonden: dinsdag 24 mei 2011 5:31
>> Aan: dx4win at mailman.qth.net
>> Onderwerp: [Dx4win] TS-480 best choice to set radio interface
>> 
>> I have a TS-480SAT and am just getting it setup as my second rig on
>> DX4WIN.
>> 
>> I had it set as a TS870 and it was working. I guess the TS870 doesn't
>> have 6M since when I try to click on a spot it says bad frequency for
>> radio. Now down in the QSO entry field it happily displays the correct
>> 6M frequency. Is there a better radio to set it as?
>> 
>> Thanks,
>> AD6ZJ
>> ______________________________________________________________
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>