[Dx4win] Freq logged in DX4WIN

[Mel]

It's normal and correct.  Jurisdictions that require amateurs keep a log 
require that the transmit frequency by logged.

On 2011-03-28 22:06, N7KA at comcast.net wrote:
>
>
> I am not sure if I have a DX4WIN problem, using V8.05, or an ELECRAFT K3 problem.
>
>
>
> When in simplex/transceive the RX/TX freq of the K3 (VFO=A and VFO=B) is the same.  OK, that's normal.  However when I go to SPLIT operation on the K3 the frequency displayed and logged in DX4WIN is the TX (VFO=B) freq which can be from 0 to whatever KHz removed from the RX freq.
>
>
>
> Example of problem:  During SPLIT operation mode  RX = 14.024.00 (VFO A on K3),   TX = 14029.00 (VFO B on K3).  DX4WIN displays and logs 14029.00.
>
>
>
> How do I get the RX freq to be indicated and logged in DX4WIN?
>
>
>
> A friend using DX4WIN V8.04 and an ICOM IC-746PRO correctly indicates and logs the RX freq in SPLIT operation.
>
>
>
> OK, it may seem a minor point but it is more important to me to log the DX station TX freq (my RX freq) than it is to log my TX freq.
>
>
>
>
>
>  From a friend who has K3 and DXLAB, both the RX and TX freq are indicated and logged.  Maybe this is a feature that can be added to DX4WIN???
>
>
>
> Arne N7KA
>
>
>
>
> Arne N7KA
> ______________________________________________________________
> Dx4win mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Dx4win at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html